52歌赋>英语词典>bevel翻译和用法

bevel

英 [ˈbevl]

美 [ˈbevl]

n.  斜边; 斜面; 斜角规
v.  把(物体的方形边)改成斜面边

复数:bevels 过去式:bevelled 过去分词:bevelled 现在分词:bevelling 第三人称单数:bevels 

BNC.39796 / COCA.30048

牛津词典

    noun

    • 斜边;斜面
      a sloping edge or surface, for example at the side of a picture frame or sheet of glass
      1. 斜角规
        a tool for making sloping edges on wood or stone

        英英释义

        noun

        • a hand tool consisting of two rules that are hinged together so you can draw or measure angles of any size
            Synonym:bevel square
          1. two surfaces meeting at an angle different from 90 degrees
              Synonym:cantchamfer

            verb

            • cut a bevel on
              1. bevel the surface
              Synonym:chamfer

            双语例句

            • Add Bevel and Emboss and Gradient Overlay.
              添加斜面和浮雕和渐变叠加。
            • Add Gradient Overlay to avoid flat color and Bevel and Emboss to give it three-dimensional appearance.
              添加渐变叠加,以避免平面色彩和斜面和浮雕,给它的三维外观。
            • Bevel Gears are the most versatile in that they have good efficiency.
              斜面齿轮执行机构具有最广泛的用途和良好的操作效率。
            • The fatigue life of spiral bevel gear can not directly use to estimate the fatigue life of transmission assembly.
              不能直接用螺旋锥齿轮闭式试验台的疲劳试验结果估算变速箱总成中主动螺旋锥齿轮的疲劳强度和疲劳寿命。
            • Bevel gears are useful when the direction of a shaft's rotation needs to be changed.
              当两传动轴旋转时需改变方向时,采用锥齿轮是一种十分有用的方法。
            • According to the simulation results, the process of bevel gear was determined.
              确定了精锻锥齿轮的成形工艺。
            • A way of promptly repairing mesh interspace and mesh width during the course of assembling bevel gear is introduced.
              介绍一种锥齿轮装配过程中,修配啮合间隙和啮合宽度的快捷方法。
            • All valves can be furnished with handwheels, chainwheels and bevel gear handwheels and chainwheels.
              所有阀门都可以配置手轮、链轮和锥齿轮手轮和链轮。
            • These provide a foundation for the control of grinding quality of spiral bevel gear.
              研究结果为螺旋锥齿轮磨齿质量的控制提供了依据。
            • Discussion on Coordinated Methods and Technique of Bevel Wheel and Worm
              论斜齿轮与蜗杆配合方法和工艺探析