52歌赋>英语词典>meshing翻译和用法

meshing

英 [ˈmeʃɪŋ]

美 [ˈmeʃɪŋ]

v.  (使)吻合,相配,匹配,适合; 啮合
mesh的现在分词

COCA.41043

柯林斯词典

  • N-VAR 网眼织物;网状物
    Meshis material like a net made from wire, thread, or plastic.
    1. The ground-floor windows are obscured by wire mesh.
      一楼的窗户装有防盗网。
    2. ...a mesh small enough to exclude tiny insects.
      网眼小得足以挡住小昆虫的网
  • V-RECIP-ERG (使)相匹配;(使)相互协调;(使)吻合
    If two things or ideasmeshorare meshed, they go together well or fit together closely.
    1. Their senses of humor meshed perfectly...
      他们的幽默感配合得天衣无缝。
    2. This of course meshes with the economic philosophy of those on the right...
      这自然与右派的经济哲学相吻合。
    3. Meshing the research and marketing operations will be Mr. Furlaud's job.
      把研究与市场运作紧密结合起来将成为弗劳德先生的工作任务。

英英释义

noun

双语例句

  • Meshing parameters in harmonic gear drive are optimized in the paper. Wherefore writer carries out another iterative computation.
    一齿轮与另一齿轮啮合.文中对谐波齿轮传动的啮合参数进行了优化设计。
  • These groups are contributing directly and indirectly to the meshing of Pakistan with the global economy.
    这些集团直接和间接地向啮合的巴基斯坦与全球经济的发展。
  • Based on the theories of rotor dynamics and gear meshing, the finite element model of a gear-shaft system was established according to a certain gear transmission system of a steam unit.
    以某机组齿轮传动系统为研究对象,根据转子动力学基本理论和齿轮啮合原理,建立了某齿轮传动系统的齿轮-轴系耦合系统振动有限元模型。
  • The character of special master gear wear for gear meshing and seperating technique is studied in this paper.
    本文研究了齿轮啮合分离测试技术中测量齿轮的磨损特性,通过对测量时磨损规律的分析。
  • The structure and principle of reciprocating positioning chain are introduced, and the meshing process is analyzed also.
    摘要介绍循环定位链传动的结构及工作原理,并分析啮合过程。
  • Study on Optimization Design of Meshing Parameters and Transmission Error for Involute Harmonic Gear Transmission
    在迭代优化计算中考虑全部啮合参数对齿轮传动的影响。渐开线谐波齿轮传动啮合参数优化设计及传动误差分析
  • And it counted the different phase equivalent gap in gear meshing, and draw corresponding graph, then got the equivalent gap change character in arc tooth cylindrical gears meshing.
    计算了齿轮工作啮合中不同相位的当量间隙,绘制了相应的曲线图,得出了弧齿圆柱齿轮啮合中当量间隙的变化特性。
  • Meshing the research and marketing operations will be Mr. Furlaud's job.
    把研究与市场运作紧密结合起来将成为弗劳德先生的工作任务。
  • After building the equations of tooth surfaces and the meshing model of a spherical gear pair, tooth contact analysis of spherical gear pairs is performed through simulation.
    在建立了球齿轮齿廓曲面方程和啮合模型基础上,利用计算机仿真的方法对其进行了齿面接触分析研究。
  • Study on the Meshing Principle of Three-freedom Straight and Inclined Gear;
    三自由度直、斜齿齿轮啮合机理的研究一齿轮与另一齿轮啮合。